No results were found for the filter!
Adapter Synchronizer 34 ICT / 34 EPC
Adapter for synchronizer (article 4004110) For Weber 34 ICT | EMPI 34 EPC carburetor.
Adapter synchronizer H40-44EIS
Adapter for synchronizer (article 4004110) For Solex / Brosol H40-44EIS carburetors.
Assembly / disassembly tool cylinder head
Mounting / dismounting tool for cylinder head for type 1 / VW Beetle engines (except 25 and 30 HP cylinder heads).
Attachment Allen 17mm - 3/8 inch Connection Oil...
Allen wrench for oil filler / drain nut. 17 mm / 3/8 inch connection.
Attachment Allen 8mm - 3/8 inch connection
Allen key attachment 8mm with 3/8 inch connection. For all models with swing axle. VW Bus (T25) Syncro front axle.
Attachment XZN 8mm - 3/8 inch connection
XZN / multi-tooth attachment 8 mm with 3/8 inch connection. For all models with semi-trailing arm rear axle (IRS). T3 Bus Syncro front axle.
Bench engine stand
Working on an engine on a workbench is not always convenient, especially if you have to regularly tilt the engine to access it. This engine mount was designed to make working on the engine easier. The engine is mounted at two points...
Brake bleeding aid. Bleeding the brakes a difficult task. With this brake bleeder you can effortlessly bleed all brakes all by yourself. You connect the brake bleeder to the brake bleeder valve and turn the valve half a turn, then press...
Capacitor assembly tool
Assembly tool for capacitor. VW Beetle 1200 - 8/59 to 9/75. VW Beetle 1300 | 1500 | 1600 - to 7/70. type 14 Karmann Ghia 1200 - 8/59 to 9/75. type 14 Karmann Ghia 1300 | 1500 | 1600 - to 7/70. VW Bus - 8/59 to 7/70. VW Type 3 - to 7/70.
Conical rings Stainless steel
Conical rings made of stainless steel. inner diameter: 4.4 mm. 10 pieces. for various applications on the VW Beetle | VW Type 3 | VW Bus | VW Type 181.
Universal stand for engine. Working on the engine with this engine stand is very easy. With the help of this stand, the engine can be completely disassembled and reassembled. The engine can also rotate while working for easy access to...
Extraction tool Starter bushing
Extraction tool starter bushing. vehicles from 8/66. diameter: 11 mm.
Fitting tool Simmerring flywheel side extra deep
Assembly tool extra deep for radial shaft seal on flywheel side. VW Beetle (except 25 and 30 HP). VW Type 3. CT/CZ engines.
Flywheel attachment - axle 36mm - 1/2 inch
Flywheel nut 36mm / 1/2 inch. VW Beetle | VW Type 3 | CT/CZ engines flywheel. VW Beetle | Type 14 Karmann Ghia | VW Type 3 | VW Type 181 axle nut. VW Bus - up to 7/63 axle nut.