Top seller
No results were found for the filter!
XZN / spline attachment 8 mm with 3/8 inch connection. For all models with independent rear suspension (IRS). T3 Bus Syncro front axle. Original CV joints only use bolts with an XZN head (12-point, also called polygonal), but if these...
€4.96 *
previously €4.96*
Gearbox tool for the VW Beetle. Socket for the pinion clamping nut. The clamping nut that holds the pinion can only be fastened and loosened with the original VW tool. At the Volkswagen dealer you could order all specific Volkswagen...
€253.45 *
previously €253.45*
Spring plate tensioner. Tensioning the spring plates is not always easy, especially when the body is not yet fitted. One option is to invite your friends to stand on the chassis so the spring plates can be tensioned, but with this spring...
€52.16 *
previously €52.16*
Ventilstößel-Messwerkzeug. Ventilstößel #4729
€38.01 *
previously €38.01*
Synchronizer professioneel for down-draft specifications .
€49.12 *
previously €49.12*
Synchronizer universal for down-draft and side-draft applications .
€14.88 *
previously €14.88*
Tension band for piston rings 83 - 87 mm.
€16.12 *
previously €16.12*
Tension band for piston rings 88 - 94 mm.
€10.62 *
previously €10.62*
Thread file. thread pitches: 0.80 | 1.00 | 1.25 | 1.50 | 1.75 | 2.00 | 2.50 | 3.00.
€57.87 *
previously €57.87*
Tool kit with bag, 8-piece. This tool kit matches the original on-board tool kit that was supplied with every new vehicle until the end of the 1960s. This tool kit is fitted with two flat-blade screwdrivers, a hub cap puller, two...
€93.14 *
Tool kit with bag. Every Volkswagen is fitted from the factory with a tool kit, which after all these years is often missing, but which is necessary. This tool kit is fitted with a wheel wrench (19 / 21 mm), which on some models also...
€56.82 *
previously €56.82*
Tool for valve adjustment. 13 mm. VW Beetle engines - up to 1983 (ch 11-E-119 815). VW Type 3 engines. Type 4 1700cc engines. CT/CZ engines. Adjusting or checking the valve clearance is part of the maintenance carried out every 5000 km....
€37.88 *
previously €37.88*
Valve gauge / feeler gauge / clearance gauge. 26 blades. 0.04 mm to 0.60 mm. A set of feeler gauges is an indispensable tool for maintaining and setting the engine, for example for adjusting the valves, contact points, spark plugs, etc....
€8.01 *
previously €8.01*
Voltage tester for 6 to 24 volt. The voltage tester is the oldest electrical measuring instrument still in use today, although it is now surrounded by a modern shell. Both at home in the workshop and on the road in the car, you should...
€3.90 *
previously €3.90*
Wagenheberplatte. VW Käfer. Karmann Ghia. VW Bus - bis 7/79. VW Typ 3. VW Typ 181 Kübel. Jeder Volkswagen wird ab Werk mit einem Werkzeugsatz und einem Wagenheber geliefert. Der Wagenheber ist das wichtigste Werkzeug. Wie kann man ein...
€45.18 *
previously €45.18*
Washers. 4.3 x 12 x 1 mm. 10 pcs. For various applications on the VW Beetle | Type 14 Karmann Ghia | VW Type 3 | VW Bus | VW Type 181.
€7.46 *
previously €7.46*
Wire brush steel. in every workshop, a wire brush is part of the assortment. this wire brush is equipped with 4 rows of wires or can be used for all cleaning work, from cleaning before welding to removing dirt from your gearbox.
€4.82 *
previously €4.82*
Internal wrench for the oil filler nut. VW Beetle - from 8/60 (except 30 hp engines). When our other tool can no longer work because the slot is damaged, this is the solution. This internal wrench grips inside the nut, so it can be...
€40.56 *
previously €40.56*
Wrench Oil filler nut outside. VW Beetle - from 8/60 (except 30 HP engines).
€17.91 *
previously €17.91*
Viewed