Products from EMPI
No results were found for the filter!
Cylindrical stud set M10 extra long (+13 mm) made of chrome molybdenum. type 1 engines dual port. type 3 engines dual port. Length: 9 x 250 mm. 3 x 215 mm. 4 x 198 mm. 16 x M10 nuts. 16 x 10,5 x 21 x 2 mm washers.
€162.80 *
Cylindrical stud set M8 extra long (+13 mm) made of chrome molybdenum. Type 1 engines with dual port cylinder heads. CT/CZ engines. Length: 9 x 250 mm. 3 x 215 mm. 4 x 198 mm. 16 x M8 nuts. 16 x 8,4 x 21 x 4 mm washers.
€160.33 *
Studs for rocker arm shaft made of chrome molybdenum steel. 4 pieces. VW Beetle 1200 cc engine - from 1964 (engine number 9 205 700). VW Beetle 1300 | 1500 | 1600 cc engine - all years of manufacturing. VW Type 3 1500 cc engine - from...
€52.94 *
Intake connecting clamps per pair. VW Beetle | Type 14 Karmann Ghia 1600 - from 8/70 and later. T2 Bus 1600 - from 8/70 and later. Type 181 Kübelwagen 1600 - all.
€18.47 *
Bushes for support arm made of polyurethane. these urethane bushes replace the original outer needle bearings with the sealing rings and the inner bakelite bushes on the front axle. they are of very good quality and easier to install. no...
€75.85 *
Bushes for support arm made of polyurethane. these urethane bushes replace the original outer needle bearings with the sealing rings on the front axle. they are of very good quality and easier to install. no sealing rings are necessary...
€33.40 *
Bushes for support arm made of polyurethane. these urethane bushes replace the original outer needle bearings with the sealing rings on the front axle. they are of very good quality and easier to install. no sealing rings are necessary...
€32.76 *
Bushes for support arm made of polyurethane. these urethane bushes replace the original outer needle bearings with the sealing rings and the inner bakelite bushes on the front axle. they are of very good quality and easier to install. no...
€75.85 *
Tailpipes chrome adapted. per pair. VW Beetle - from 8/55 and later (except injection engines). type 14 Karman Ghia engines (except injection engines).
€46.45 *
Tappet with oil hole. diameter: 30 mm. weight: 94 g. 8 pieces. type 1 / VW Beetle engines (except 25 and 30 hp) - up to 9/92. VW type 3 engines.
€44.51 *
Threaded inserts. inside: M10 x 1.5. outside: M14 x 2.0. 8 pieces. for all air-cooled engines with M10 bolts.
€18.50 *
Extra long throttle cable / gas cable inside. length: 4572 mm.
€19.79 *
Torsion bushings / torsion bar bushings made of polyurethane. per pair. VW Beetle inside - from 8/59 and later. type 14 Karmann Ghia inside - from 8/59 and later. VW Type 3 inside | outside - up to 7/68. VW Type 3 inside - from 8/68 and...
€37.04 *
Torsion bushings / torsion bar bushings made of polyurethane. per pair. VW Beetle inner | outer - up to 7/59. VW Beetle semi-trailing arm (IRS) outer - up to 7/59. type 14 Karmann Ghia inner | outer - up to 7/59. type 14 Karmann Ghia...
€37.04 *
Torsion bushings / torsion bar bushings made of polyurethane. per pair. VW Beetle outside - 8/59 to 7/68. type 14 Karmann Ghia outside - 8/59 to 7/68. when using torsion bar cover 1430 or 4430 - from 8/59 and later.
€37.04 *
Torsion bushings / torsion bar bushings made of polyurethane. per pair. VW Beetle outside - from 8/68 and later. type 14 Karmann Ghia outside - from 8/68 and later.
€37.04 *
Track rod set shortened. track rod left: 21 cm. track rod right: 60.3 cm. ball thread: M10. VW Beetle - up to 7/65. type 14 Karmann Ghia - up to 7/65.
€136.45 *
Track rod set shortened. track rod left: 20.3 cm. track rod right: 58.1 cm. ball thread: M12. VW Beetle 1200 | 1300 | 1500 - from 1968 (ch 118 857 240). type 14 Karmann Ghia - from 1968 (ch 148 857 240). VW type 181.
€136.45 *
Trunk cardboard / trunk box. lining for trunk. VW Beetle 1200 - 8/67 to 7/74.
€80.10 *
Carpet set for trunk in black. material: 100% polypropylene. VW Beetle 1200 | 1300 | 1500 - from 8/67 and later.
€93.00 *
Viewed