Standard Wheel Silver | PCD 4x130 | 4.5x15 | ET+45

Standard steel wheel, silver painted, sold each.
Size: 4.5 x 15.
Offset: +45.
PCD 4 x 130.
Bolts: M14 x 1.5.

Restoring your old wheels can in some cases be a lengthy job, especially if they are no longer in very good condition. An inexpensive but also very good solution is to fit new wheels. With a 4 x 130 and 5 x 205 bolt pattern you can choose between the standard widths of 4.5 inch and 5.5 inch. The 5.5 inch wheels also fit seamlessly into existing wheel arches or fenders; they fill the arch or fender better and thus give a more robust appearance. Remember to choose the correct tire size for the VW model the wheel is intended for, and also check the available space in your wheel arches. The 5 x 112 bolt pattern is only available in the original color and size (5.5 inch, gray painted).

In terms of design, all wheels are identical to the original, and for the 4 x 130 and 5 x 205 you can choose between gray paint (like the original) or PVD chrome.

The 5 x 205 wheels match those of a Porsche 356, so they are the perfect choice for a 356 replica or a genuine 356.

All wheels are supplied each without bolts, valves or hub caps; add these separately if needed. Also read the technical data, which explains the various bolt patterns, model years and models the wheels are suitable for.

PVD chrome: chrome wheels are not electroplated in the conventional way but PVD-chromed. A PVD treatment gives a higher gloss than electroplated chrome and rules out rust. PVD stands for Physical Vapor Deposition, an advanced powder-coating method. Polishing chrome is no longer a problem either - you treat your chrome wheels just like your paintwork.

Attention! Production is based on the assumption that the original VW hub caps are fitted. Fitting imitation hub caps can cause installation problems. Any damage caused by this is at your own risk.