Top seller
No results were found for the filter!
Repair / adapter stud from M8 x 1.25 to M6 x 1.0. Sold each. Total length: 23 mm. With these adapter studs you can fit a Type 1 oil cooler for M6 studs to a crankcase for M8 studs. The repair studs can also be used for the crankcase...
€3.33 *
previously €3.33*
Alternator base gasket. VW Beetle - up to 7/67. type 14 Karmann Ghia - up to 7/67. T2 Bus - up to 7/67. VW Type 3.
€0.75 *
previously €0.75*
Engine bolt set with 10 mm bolts. type 1 engines (except 25 +30 HP). type 3 engines.
€47.03 *
previously €47.03*
Engine bolt set with 10 mm bolts. type 1 engines (except 25 +30 HP). type 3 engines.
€63.51 *
previously €63.51*
Engine bolt set with 8 mm bolts. type 1 engines. type 3 engines. CT/CZ engines.
€57.23 *
previously €57.23*
Sealing cap for oil filler neck. for engine housing 1969 | 1655 | 1707 | 1720 | 1789.
€9.08 *
previously €9.08*
Partition wall / partition plate for crankshaft housing.
€32.05 *
previously €32.05*
Standard engine case made of AS41 alloy (4% magnesium, 1% silicon). Cylinder bore: 96 mm. Max. crankshaft stroke: 69 mm. Type 1 engines (except 25 + 30 hp) - up to 1835cc. Type 3 engines - up to 1835cc. These Super-Stock crankcases are...
€1,645.45 *
previously €1,645.45*
Standard engine case in AS41 alloy (4% magnesium 1% silicon). cylinder bore: 97 mm. max. crankshaft stroke: 69 mm. type 1 engines (except 25+30 HP) - up to 1915cc. type 3 engines - up to 1915cc.
€1,602.13 *
Standard engine case in AS41 alloy (4% magnesium 1% silicon). cylinder bore: 90 mm. max. crankshaft stroke: 69 mm. type 1 engines (except 25+30 HP) - up to 1679cc. type 3 engines - up to 1679cc.
€1,472.22 *
previously €1,472.22*
Standard engine case made of AS41 alloy (4% magnesium, 1% silicon). Cylinder bore: 96 mm. Max. crankshaft stroke: 82 mm. Type 1 engines (except 25 + 30 hp) - up to 2180cc. Type 3 engines - up to 2180cc. These Super-Stock crankcases are...
€1,515.56 *
previously €1,515.56*
Standard engine case in AS41 alloy (4% magnesium 1% silicon). cylinder bore: 97 mm. max. crankshaft stroke: 82 mm. type 1 engines (except 25+30 HP) - up to 2276cc. type 3 engines - up to 2276cc.
€1,558.88 *
previously €1,558.88*
Engine case standard VW OEM. Type 1 engines - from 8/70 onwards (large oil galleries). T2 Bus 1600 (except CT) - from 8/70 onwards. Type 3 1600. When you have started overhauling your engine, you should check whether the crankcase is...
€1,010.70 *
Repair kit for housing. consists of:. oil filler cap with seal, screws and nuts. oil pressure springs, pistons, washers and fixing screws. bolts for oil pump. oil cooler bolts (8 mm / 6 mm). bolts for mounting on gearbox. type 1 engines...
€45.62 *
previously €45.62*
Deflector plate (oil baffle). VW Beetle - from 8/67 onwards. Type 14 Karmann Ghia - from 8/67 onwards. T2 Bus 1500 | 1600 - from 8/67 onwards (except CT). VW Type 3 - from 8/68 onwards. 181 (Thing). The seal between the...
€1.43 *
previously €1.43*
Crankcase stud O-rings (6 pieces). Type 1 engines except 25 and 30 hp. Type 3 engines. CT/CZ engines. Outer diameter: 18 mm. Inner diameter: 10 mm. When assembling the crankcase, a liquid seal is used for sealing. Around the threaded...
€4.52 *
previously €4.52*
Cylindrical stud set M10 extra long (+13 mm) made of chrome molybdenum. type 1 engines dual port. type 3 engines dual port. Length: 9 x 250 mm. 3 x 215 mm. 4 x 198 mm. 16 x M10 nuts. 16 x 10,5 x 21 x 2 mm washers.
€202.76 *
previously €202.76*
Cylindrical stud set M8 made of chrome molybdenum. Type 1 engines with dual port cylinder heads. CT/CZ engines. Length: 9 x 237 mm. 3 x 202 mm. 4 x 185 mm. 16 x M8 nuts. 16 x 8,4 x 21 x 4 mm washers.
€153.64 *
previously €153.64*
Cylindrical stud set M8 extra long (+13 mm) made of chrome molybdenum. Type 1 engines with dual port cylinder heads. CT/CZ engines. Length: 9 x 250 mm. 3 x 215 mm. 4 x 198 mm. 16 x M8 nuts. 16 x 8,4 x 21 x 4 mm washers.
€165.10 *
previously €165.10*
Cylinder stud set M10 extra, made of chrome-molybdenum. Type 1 engines with dual-port cylinder heads. Type 3 engines with dual-port cylinder heads. Length: 9 x 237 mm. 3 x 202 mm. 4 x 185 mm. 16 x M8 nuts. 16 x 8.4 x 21 x 4 mm washers....
€153.28 * €191.60 *
previously €191.60*
Cylinder stud set M8 made of chrome-molybdenum. Type 1 engines with single-port cylinder heads. Length: 9x 23.8 cm. 7x 20.3 cm.
€37.90 * €47.37 *
previously €47.37*
Threaded inserts. inside: M8 x 1.25. outside: M12 x 1.5. 8 pieces. for all air-cooled engines with M8 bolts.
€14.08 *
previously €14.08*
Threaded inserts. inside: M10 x 1.5. outside: M14 x 2.0. 8 pieces. for all air-cooled engines with M10 bolts.
€18.50 *
previously €18.50*
Threaded inserts. inside: M8 x 1.25. outside: M14 x 2.0. 8 pieces. for all air-cooled engines with M8 bolts.
€27.76 *
previously €27.76*
Viewed