Standard Wheel Chrome | 5x205 | 5.5x15 | ET+15

Standard steel wheel, chrome-plated, sold each.
Size: 5.5 x 15.
Offset: +15.
Bolt pattern: 5 x 205.
Bolts: M12 x 1.5.

Restoring your old wheels can in some cases be a lengthy job, especially if they are no longer in very good condition. A cost-effective but also very good solution is fitting new wheels. With a bolt pattern of 4 x 130 and 5 x 205 you can choose between the standard widths 4.5 inch and 5.5 inch. The 5.5 inch wheels also fit seamlessly into existing wheel arches or fenders; they fill the wheel arch or fender better and give a more robust appearance. Remember to choose the correct tyre size depending on the VW model the wheel is intended for, and also check the available space in your wheel arches. The 5 x 112 bolt pattern is only available in the original colour and size (5.5 inch, grey painted).

In terms of design all wheels are identical to the original and with the 4 x 130 and 5 x 205 you can choose between grey paint (like the original) or PVD chrome.

The 5 x 205 wheels correspond to those of a Porsche 356, so for the 356 replica or a genuine 356 the perfect choice can be made.

All wheels are supplied without bolts, valves and hubcaps; take these extra if needed. Also read the technical data, which explains the various bolt patterns, the years and the models the wheels are suitable for.

PVD chrome: Chrome wheels are not chrome-plated in the conventional electrolytic way, but PVD chrome-plated. A PVD treatment gives a higher shine than electrolytic chrome-plating, which rules out rust. PVD stands for Physical Vapour Deposition, an advanced method of powder coating. Polishing chrome is also no longer a problem; you treat your chrome wheels the same as your paintwork.

Caution! Production is based on the assumption that the original VW hubcaps are fitted. Fitting imitation hubcaps can cause fitting problems. Any damage that results is at your own risk.