Top seller
No results were found for the filter!
Repair kit for clutch release shaft urethane clutch. diameter: 20mm. VW Beetle - 1971 to 12/85. type 14 Karmann Ghia - 1971 to 12/85. T2 Bus - from 8/75 and later. VW Type 3 - from 9/71 and later. 181 bucket car - from 8/71 and later.
€38.35 *
previously €38.35*
Clutch disc 180 mm. VW Beetle engines 25 + 30 hp. VW Beetle engines 1200 | 1300 cc - until 1980 (D 1455271). VW Type 3 engines - until 7/62.
€62.33 *
previously €62.33*
Clutch disc 200 mm. VW Beetle engines 1500 | 1600 cc - until 1975. engine code AJ | AL | ACD - from 1975 and later. VW Beetle engine 1200 cc - from 1980 and later. VW type 3 engines - from 8/62 and later.
€76.06 *
previously €76.06*
Feramic clutch disc 200 mm. Type 1 engines. Type 3 engines. The original clutch disc fails quickly in off-road and racing use. It is not able to withstand the high heat generated under heavy load. The Feramic clutch discs are specially...
€87.55 *
previously €87.55*
Kush-Lock clutch disc 200 mm. VW Beetle / Type 1 engines. Type 3 engines. The original clutch disc was originally designed for a maximum power of 50 hp. If the engine power is increased by a few hp, you have nothing to worry about. But...
€65.24 *
previously €65.24*
Reinforced clutch pressure plate 200 mm. 771 kg / 1700 lb.
€172.31 *
previously €172.31*
Reinforced clutch pressure plate 200 mm. 952 kg / 2100 lb.
€282.10 *
previously €282.10*
Reinforced clutch pressure plate 200 mm. 1179 kg / 2600 lb. When the engine power increases, problems with the clutch can occur. It slips through more quickly. The problem lies in the pressure plate, which does not press the clutch disc...
€282.63 *
previously €282.63*
Standard clutch pressure plate 180 mm. VW Beetle 25 + 30 hp - up to 7/70. VW Beetle 1300cc - up to 7/70. VW Beetle 1200cc - up to 1972. VW Type 3 - up to 7/62. Sudden grabbing of the clutch disc despite a correctly adjusted clutch is...
€78.36 *
previously €78.36*
Standard clutch pressure plate 180 mm. VW Beetle 1200 cc - 1972 to 1980. VW Beetle 1300 cc - from 8/70 and later.
€138.44 *
previously €138.44*
Standard clutch pressure plate 200 mm. VW Beetle 1200 cc - from 1980 and later. VW Beetle 1600 cc - from 8/70 and later. VW Type 3 - from 8/70 and later.
€75.65 *
previously €75.65*
Standard clutch pressure plate 200 mm. VW Beetle 1500 | 1600 cc - up to 7/70. VW Type 3 - 8/62 up to 7/70.
€193.68 *
previously €193.68*
Release shaft for clutch. Diameter: 20 mm. VW Beetle 1200 - 1972 to 12/85. VW Beetle 1300 | 1303 - from 1971 onwards. Type 14 Karmann Ghia - from 1971 onwards. VW Type 3 - from 9/71 onwards. 181 (Thing) - from 8/71 onwards. Sudden...
€23.56 *
previously €23.56*
Dichtungssatz für voll synchronisierte Getriebe in Premium Qualität. VW Käfer - ab 8/60. Typ 14 Karmann Ghia - ab 8/60. VW Bus - 8/60 bis 7/67. Nicht für Automatikgetriebe. Dieser Dichtungssatz in A-Qualität umfasst alle Dichtungen und...
€39.54 *
previously €39.54*
Druckplatte 215 mm. Typ-1 Motoren 1600 AS, AF 1975 (Fahrgestellnummer 216 2118 506) und später. Typ-4 Motoren 1800 AW, AP 1974 (Fahrgestellnummer 214 2125 001) bis 7.1974. CT/CZ Motoren. Wasserboxer-Motoren 1900 bis 1983 (DF bis 027930,...
€163.02 *
previously €163.02*
Führung für Rückholfeder. VW Käfer - ab 5/74 und später. Karmann Ghia - ab 5/74 und später. Typ 181 (Kübel) 1600 - 5/74 bis 12/79. VW Typ 3 1500 | 1600 - 5/74 bis 7/73.
€10.53 *
Führungshülse für Rückholfeder. Durchmesser: 20mm VW Käfer - bis 1971 (VIN 112 2070 812). Karmann Ghia - bis 1971 (VIN 142 2070 812). VW Bus - bis 7.1975. VW Typ 3 - bis 1971 (VIN 312 2016 037). Typ 181 Kübel - bis 7/71.
€8.01 *
previously €8.01*
Führungshülse für Rückholfeder. Durchmesser: 20mm VW Käfer - ab 1971 (VIN 112 2070 813) und später. Karmann Ghia - 1971 (VIN 142 2070 813) und später. VW Typ 3 - 1971 (VIN 312 2016 038) und später. Typ 181 Kübel - 8/71 und später.
€8.01 *
previously €8.01*
Gasket set for fully synchronized gearboxes. VW Beetle - from 8/60. type 14 Karmann Ghia - from 8/60. VW Bus - 8/60 to 7/67. not for automatic gearboxes.
€12.89 *
previously €12.89*
Guide sleeve for release bearing. VW Beetle 1300 | 1302 | 1303 - from 8/70 onwards. VW Beetle 1200 - from 4/72 onwards. T2 Bus - 8/70 to 7/92. When the clutch actuates the shaft, it often causes serious damage to the clutch housing. You...
€5.65 *
previously €5.65*
Schwingscheiben-Befestigungskit in verstärkter Ausführung. VW Käfer. Karmann Ghia. Bus mit Typ-1-Motor bis 1976 (Fahrgestellnummer 296 2137 724). Bus mit Typ-4-Motor von 8.1973 bis 1974 (Fahrgestellnummer 294 2125 000) und ab 8.1975. Typ...
€4.44 *
previously €4.44*
Kupplungsdruckplatten-Befestigungsschrauben (6 Stück). Bus: mit Typ-1 Motor ab 1976 (VIN 216 2137 725 und später). mit Typ-4 Motor 1974 (VIN 214 2125 001 bis 7.1975). mit CT/CZ Motor. . Spezifikationen: . Gewindegröße: M7. Länge: 18 mm....
€7.52 *
previously €7.52*
Kupplungsscheibe 215 mm. Typ-1 Motoren 1600 AS, AF ab 1975 (Fahrgestellnummer 216 2118 506 und später). Typ-4 Motoren 1800 AW, AP ab 1974 (Fahrgestellnummer 214 2125 001) bis 7.1974. CT/CZ Motoren. Wasserboxer-Motoren 1900 bis 1983 (DF...
€135.65 *
previously €135.65*
Mounting clips for release bearing reinforced. per pair. VW Beetle 1300 | 1500 - to 7/70. VW Beetle 1200 - to 3/72. T2 Bus - 3/50 to 7/70.
€1.79 *
previously €1.79*
Viewed