Cam Follower 30mm EMPI

Cam follower with oil bore.
Diameter: 30 mm.
Weight: 94 g.
8 pieces.
Type 1 / VW Beetle engines (except 25 and 30 hp) - up to 9/92.
VW Type 3 engines.

When building a faster Type 1 or Type 3 engine, not only the choice of displacement or camshaft is important - there is much more to it. For example, the cam followers must match the camshaft not only in material but also in size. The sharper the camshaft, the larger the surface of the cam follower must be. With a normal camshaft a 28 mm cam follower (standard size) can easily be sufficient, but with a sharper camshaft the surface can be too small and must be increased to a larger area (30 or 31 mm). We strive to save as much weight as possible.

All cam followers are made in one piece from chrome-molybdenum aluminum, which means they weigh less and are also stronger. The EMPI cam followers are fitted as standard with an additional oil bore that provides pressure lubrication between cam follower and cam, which is no superfluous luxury when increasing engine speed. With these followers it is necessary to fit a stronger oil pump.

When choosing a cam follower it is important that it is of the same brand as your camshaft. Using a cam follower brand other than the camshaft creates the possibility that these parts interact and cause irreparable damage; if this cannot be proven (both listed on the same invoice), no warranty claims can be made. All cam followers are supplied in sets of 8 pieces.

Type 1 engines up to 9/1992 (except 25 and 30 hp) and Type 3 engines
01630 : Engle, 28 mm, 98 grams, no additional oil bore
02095 : Webcam, 29 mm, 95 grams, no additional oil bore
04632 : EMPI, 28 mm, 92 grams, with additional oil bore
04633 : EMPI, 30 mm, 94 grams, with additional oil bore
01799 : EMPI, 31 mm, 96 grams, with additional oil bore

Type 4 engines
41633 : Webcam, mechanical, 98 grams, with additional oil bore
41634 : Webcam, hydraulic, 120 grams, no surcharge

It is almost a necessity to install all moving parts with assembly lube during an overhaul; this prevents premature wear during running-in. To hold the cam follower in place during the work, there are special cam follower clamps.
50890 : assembly paste (7 grams)
01108 : cam follower clamps per pair