Low shipping costs

  14 days return policy

  Fast shipping

  Secure payment methods

Gearbox Swing Axle 8:33 | 4.12 Diff

Getriebe Pendelachse 8:33 Bild 1
€3,782.12 *
Spedition Symbol Logo

Prices incl. VAT plus shipping costs

Delivery time 7-28 Tage Workdays

  • 5001495
Fully reconditioned gearbox for swing axle. Final drive ratio: 8:33 (4.125). Swing axle. A... more
Product information "Gearbox Swing Axle 8:33 | 4.12 Diff"

Fully reconditioned gearbox for swing axle.
Final drive ratio: 8:33 (4.125).
Swing axle.

A gearbox does not last forever. Various parts can wear out after a while, making gear changes difficult or causing noise while driving. You can open the gearbox yourself and fix the problem, but it is often not an easy task. A ready-made solution is a fully reconditioned gearbox with a final drive of 8:33 (4.125), 8:35 (4.375) or 8:31 (3.875). The latter has always been fitted by Volkswagen on models that came standard with a 1600 cc engine. This type of final drive is very popular with everyone who has fitted an engine of 1600 cc or more. Thanks to this ratio all gears are longer, resulting in a higher top speed. The revs are lower than before above a certain speed, resulting in less engine noise in the passenger compartment. If you now have an engine of 1200, 1300 or 1500 cc fitted, you can still fit an 8:31 (3.875) gearbox without problems, but bear in mind that the torque will be much lower and you will have to accelerate longer before reaching the desired speed.

All reconditioned gearboxes are supplied complete, except for mounting rubbers, release bearing and oil.

All gearboxes are fully synchronised. If you have a car up to model year 7/1960, it is also possible to fit it with a conversion adapter which you can buy in our shop.

Note on the reconditioning:

The gears of the various speeds are fitted with an additional ring gear that ensures the synchronisation and transmission of the power of the gear being selected. Many reconditioned gearboxes have lost some of their teeth, whereas this is not the case with the original. This adjustment is, however, made deliberately to avoid shifting problems. Gears are originally fitted with thin and thick teeth on a ring gear. Only the thickest teeth are loaded and subject to wear. If these teeth are too worn, the gearbox tends to jump out of gear or you can no longer shift smoothly. To avoid this, during reconditioning the thicker teeth are removed so that the remaining thinner, still newer teeth can take over these tasks. This is of course only done if these teeth are so worn that it cannot be guaranteed they will last a whole gearbox life without problems. Fitting new ring gears is unfortunately not possible, as these are simply not available. The "new" gearbox is not weaker than the original, because the number of thicker teeth is always equal to or smaller than the number of thinner teeth. This method is used by many reconditioning companies and is now a recognised way of solving this problem.

All gearboxes mentioned are applicable to the Volkswagen Beetle and Karmann Ghia from 8/1960 (can also be used before, see text), and it is not necessary to return your old gearbox.

If your car is older than 7/1960, you need a conversion adapter to fit the gearbox. It is advisable to replace the release bearing with pressure plate, clutch disc and mounting rubbers straight away, as well as the drive sleeves on the swing axle version. Do not forget to order the correct oil. All gearboxes are supplied without oil. You can buy the oil separately in our shop.

Pro-Street gearboxes

With a slightly stronger engine you can use the standard gearbox without problems, although it is advisable to use a gearbox with a final drive of 8:31 (3.875). If the power increases considerably, a standard gearbox can cause problems. Pro-Street gearboxes are reinforced in many respects and can be used for heavier duties such as off-road racing, drag racing, circuit racing, etc.

The gearbox is built specially for you after ordering, so the right of withdrawal is excluded.

Related links to "Gearbox Swing Axle 8:33 | 4.12 Diff"
Read, write and discuss reviews... more
Customer evaluation for "Gearbox Swing Axle 8:33 | 4.12 Diff"
Write an evaluation
Evaluations will be activated after verification.

The fields marked with * are required.

I have read the data protection information.

Achsmanschetten Pendelachse einteilig Bild 1 Axle boots Swivel axle one-piece
€9.58 *
previously €9.58*
Drive Shaft Swing Axle Drive Shaft Swing Axle
€134.55 *
previously €134.55*
Scheinwerfer H4 "Angel Eyes" Bild 1 Headlight H4 Angel Eyes
€87.96 *
previously €87.96*
Überholter Motor 1641cc W-100 (Neugehäuse) mit Austauschkern-Pfand Überholter Motor 1641cc W-100 (Neugehäuse) mit...
€5,648.81 *
previously €5,648.81*
VW Käfer 39 PICT-3 Vergaser 39 PICT-3 Vergaser
€150.81 *
previously €150.81*
Spurverbreiterung 4x130 / 25mm / Schrauben 50mm Wheel Spacers 4x130 / 25mm / Bolts 50mm
€53.31 *
previously €53.31*
Vergaser Set EMPI EPC 34mm Bild 1 Carburetor Set EMPI EPC 34 Single Port
€732.96 *
previously €732.96*
Werkzeug Ventileinstellung Bild 1 Valve Adjustment Tool
€37.88 *
previously €37.88*
Messwerkzeug Kurbelwelle Bild 1 Measuring Tool Crankshaft
€18.06 *
previously €18.06*
Synchronisator Professionell Bild 1 Synchronizer Professional
€49.12 *
previously €49.12*
Rückfahrleuchte Kombination Bild 1 Reversing light combination
€18.36 *
previously €18.36*
Modular Felge Chrom 10.0x15 Bild 1 Modular Rim Chrome 10.0x15
€242.50 *
previously €242.50*
Motorenverblechungsset Chrom Bild 1 Engine paneling set chrome
€122.57 *
previously €122.57*
Gebläsegehäuse Ram flow Bild 1 Blower housing Ram flow
€133.33 *
previously €133.33*
Carburettor set EMPI-Brosal 40mm Carburettor set EMPI-Brosal 40mm
€767.85 *
previously €767.85*
Vergaser 34 PICT-3 / 34 PICT-4 Bild 1 Carburetor 34 PICT-3 / 34 PICT-4
€127.50 *
previously €127.50*
Entlüftungsturm Kurbelwellengehäuse Bild 1 Ventilation tower Crankcase
€296.00 *
previously €296.00*
Oil pump high performance steel Oil pump high performance steel
€105.35 *
previously €105.35*
Stößelstangenrohre verstellbar Bild 1 Adjustable push rod tubes
€88.20 *
previously €88.20*
Stößelstangenrohre verstellbar mit Feder Bild 1 Push Rod Tubes Adjustable with Spring
€125.18 *
previously €125.18*
O-Ring Schwungrad Bild 1 O-ring flywheel
€0.80 *
previously €0.80*
Flywheel gasket 25 and 30 hp Flywheel gasket 25 and 30 hp
€2.24 *
previously €2.24*
Abstandsring Schwungrad 0.24mm Bild 1 Spacer ring flywheel 0.24mm
€1.96 *
previously €1.96*
Abstandsring Schwungrad 0.32mm Bild 1 Spacer ring flywheel 0.32mm
€7.47 *
previously €7.47*
Synchronisator Universal Bild 1 Synchronizer Universal
€14.88 *
previously €14.88*
GT Motorsport Auspuff schwarz lackiert Bild 1 GT Motorsport Exhaust Black Painted
€148.46 *
previously €148.46*
Benzintank / Kraftstofftank Bild 1 Petrol tank / fuel tank
€166.11 *
previously €166.11*
Einlassdichtung Standard Bild 1 Double channel inlet seal
€5.57 *
previously €5.57*
Viewed